Tenob Dinghy and Yacht Kitset Trailer

Print Full Specs

  • Suitable to carry a dinghy (including rigid hulled inflatable) up to 3mtrs (10ft) in length.
  • Comes complete with a handy sailing dinghy mast holder located on the drawbar (this can be removed if not required).
  • Adjustable height side rollers. Trailer frame is fully galvanised.  8" galvanised wheel rims and axle. 4.80 - 8" 4 ply tubeless tyre.
  • Maximum pressure 60 psi.
  • 3.75 - 8" wheel rim. 4 studs with a standard 4" pattern. No suspension. Max weight: 400kg.
  • 3 ~ 3.25m long overall. (2 positions). 1.88m wide overall.  1.5m inside guards. Bow chock to centre roller 2.2 ~ 2.5m (2 positions).
  • Centre roller 160mm wide, adjustable in height range 120mm. Side rollers 83mm wide, adjustable in height range 150mm.
  • Supplied in kitset form. Takes about 1 hr to assemble with standard handtools. No welding required.
  • It is highly recommended that the hub is packed fully with marine grease before use. There is a grease nipple on the inside of the hub for this and for maintenance purposes.
  • Excludes lights & on-road costs.
  • 12 month limited warranty (items such as tyres, wheel bearings and seals excluded).
  • Please note that freight is an additional $75.